Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that protects against key-cloning, hacking, and vehicle theft. It can also reduce your insurance costs and even qualify you for incentives.
The Ghost immobiliser, which is discreet and easy to operate is integrated into the ECU of the vehicle. This makes it impossible for the engine to start without an unintentional code.
TASSA Approved
If you want to prevent your vehicle from being taken by key cloning, then you'll need the TASSA verified Autowatch Ghost immobiliser system. This is the latest in car security and stops thieves two ways - it will stop your car from starting if the keys are copied and stops you from driving away if they've stolen your keys.
The Ghost is the newest generation and connects to the CAN data network of your vehicle. A personalised PIN code can be entered using the standard buttons on the dashboard or the steering wheel. The Ghost then prevents the engine starting and can be programmed to a number of different settings such as Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and doesn't make use of radio frequency signals, which means that it cannot be identified by RF scanning equipment or a 'code grabber'.
The Ghost is a weatherproof, tiny device and is completely sealed to allow it to be hidden inside the vehicle or placed on the dashboard, where it is nearly impossible for a burglar to find. Learn Additional is not an Thatcham Category Approved product, but it is recognized by insurance companies as a highly efficient anti-theft device. It also comes with a five years warranty.
The TASSA procedure guarantees that any installation work on the Ghost is performed by a certified installer. This gives the customer, insurers and police confidence in the integrity of any installation carried out. It will also guarantee that the installers follow the manufacturer's instructions and set up the product correctly. Installers who are TASSA members are committed to excellence, and they desire to make a difference in the fight against crime.
Compatible with a variety of vehicles
The Autowatch Ghost 2 is a cutting-edge immobiliser that is designed to protect your vehicle against modern day key cloning. The PIN code system of the Autowatch Ghost 2 is integrated into the vehicle's ECU, making it harder for thieves to copy keys or hack the system. It is also discrete and easily installable in many vehicles such as minivans and sports automobiles. It is also weatherproof, and small enough to hide away from view. This makes it more difficult for thieves to steal it.
Installation of the Ghost is simple and does not require any additional wiring. It is compatible with a variety of vehicles and relies on the CAN data network of the vehicle to communicate. It is also able to be deactivated or turned off from the main display of the vehicle. It is also compatible with a range of mobile applications, making it simple to manage your vehicle's security remotely.
The Ghost may have some issues following installation, despite its numerous advantages. These problems can be caused by a number of factors, including faulty wiring or an incompatible mobile app. In these cases, speaking with a professional installer is the best option to solve the issue.
Another issue that users face is difficulty entering the Ghost's disarm sequence. This is often due to users not practicing or forgetting the correct sequence. However, the manual for the device provides an emergency code that can be used in the case of these issues.
Distinction
Autowatch Ghost is a discreet and sophisticated security system that protects your vehicle from theft. This device is invisible to thieves and utilizes the CAN data network of your vehicle to perform its function. car ghost immobiliser can also be activated by security systems such as car alarms and can send real-time alerts to the owner. These features can assist the police in finding your vehicle if it is stolen.
This system can be put in place in under an hour and is compatible with the majority of cars. It's an aftermarket device TASSA-approved that is compatible with vehicle trackers and even recognized by a few insurance companies. It's also tamperproof and quiet so that criminals won't be hearing it operate. The Ghost immobiliser is also programmable to require a PIN of up to twenty numbers. This makes it virtually impossible to determine the PIN.
Another advantage of the Ghost is that it is only activated when the vehicle is in Service/Valet mode. This will prevent you from accidentally giving the PIN code to a mechanic or any other person who may need to access the computer system of your vehicle. The Ghost is backed by a five-year warranty.
The Autowatch Ghost is an innovative immobiliser that is able to stop key cloning as as ECU hacking, and car theft. It's a CAN bus aftermarket device that's a great choice for both new and old vehicles. It's easy to install and works quietly, so it can be put in any vehicle without cutting wires. You can also change your pin with ease to make sure that only you are aware of it. The system is nearly undetectable because it does not utilize RF scanning technology, or code-grabbing technology.
Easy to use
Autowatch Ghost is an innovative and efficient security system that was designed to thwart vehicle theft by shutting off the engine. It uses a personalised code designed by the owner of the vehicle, which must be entered prior to the car can begin. This technology is advanced and enhances the overall security measures of your vehicle making it a preferred choice for many motorists. This installation process is not without its challenges. It requires careful planning and attention to details. This includes checking compatibility and using a professional's knowledge, adhering legal regulations, and understanding the Ghost II's operational complexities. The importance of these aspects will ensure a successful installation, and optimum functionality.
Unlike conventional systems unlike conventional systems, the Ghost II is silent and can't be spotted by thieves. It is also tiny and weatherproof, making it hard to get into. It is compatible with CAN, Lenastark and other vehicles. It can be used even in vehicles where the battery has to be isolated to ensure maintenance. The Ghost 2 has a Transport Mode which disables the device while your car is being rented or loaned.
Before starting the Ghost 2, you will have to enter a PIN code that is unique to you. The installer will set the default PIN for you, however for your own security it is recommended to change it as quickly as you can. The device is able to enter sleep mode to conserve the battery, but should it detect an engine management system it will wake up and block the vehicle from starting. This feature can be turned off in the Settings menu. It is recommended to use the Ghost immobiliser when your vehicle is driven, and to secure it prior to leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security system that thwarts car theft by disabling the engine of the vehicle. It works with a code that is unique to the owner of the vehicle, which makes it a powerful deterrent. Installing this device requires careful attention to detail and meticulous preparation. By ensuring compatibility, relying on professional expertise, adhering to legal regulations and comprehensively understanding the system's workings will make sure that the installation process is smooth and reap the maximum benefits from this security solution.
This innovative CANbus-based immobiliser is easy to install and operates silently which means that criminals are unable to hear it. It utilizes the CAN bus to communicate with your vehicle and is compatible with a large variety of vehicles. It is a real revolution in the field of vehicle security. It also protects your car from key cloning, hacking and theft of your car, since it will not start without the proper pin code. It's weatherproof and compact which makes it difficult for criminals to spot it or modify it.
To begin working with your Ghost Immobiliser To begin, review the wiring diagram for your vehicle and identify the CAN high (CAN H) and low (CAN L) wires. Then connect the CAN high to the CAN low and connect the low CAN wire to the ECU. These wires can be found under the dashboard, or near the engine.
It is recommended to employ an accredited and reliable installer to install your Ghost immobiliser. This way, you will be sure that the system has been properly installed and will not hinder the functionality of your vehicle. The installer will also be able to give you advice on how to best make use of your new device.